Specs
Diamond Weight:
1.03 ct
Carat weight is the physical weight of the diamond; 1 Carat equals 1/5th of a gram. But that's not what's important, what is important is that the higher the carat weight of your jewelry or diamond the more it will shine, provided that you backed your carat weight with other characteristics that make the diamonds so special. We give unparalleled advice on how to decide what the most practical combination of diamond characteristics are most suitable for you and your jewelry. Listed below are a few combination with specific jewelry objectives, figure out your objective and the method of reaching it should be listed above.
High Quality
After years of being a jewelry consumer you will finally realize that quantity will not beat out quality, and for this you want to go with a minimum of VS1 F color. However, we rarely manufacture jewelry with this grade on a massive scale simply because few customers can appreciate it, pay for it, or even recognize it when they see it.
Diamond Clarity: VVS1
VVS1 VVS2
Pristine quality with microscopic flaws that take time to find even to trained eyes with powerful microscopes. If you want to spend your money on VVS you should also invest to couple them with at least F color to make it worth your while.

Diamond Color: D
D
D is pure colorless, and a very rare diamond. It has a sparkle that will mesmerize any on looker. If you have the finances for a D color diamond you may not always see the difference but you will certainly feel it.

Cut: Russian Round Cut
A Russian Round Cut diamond is cut with the intention of producing maximum brilliance. These impeccably cut stones have fire and luster unparalleled in the diamond industry.
Gemstones: Sapphire

Sapphire is the most appreciated gemstone in the U.S,
It belongs to the same Gemstone family as Ruby: Corundum.
Sapphire and Ruby are very resistant, ranked 9 on the Mohs scale just behind Diamond.
Sapphire can have every colors, not just deep blue, whereas Ruby is just red, pinkish or purplish...
The most sought after is the “Padparadscha” sapphire which is half orange-half pink and only comes from the South of Sri Lanka. Padparadscha means “color of the lotus blossom” in Sinhalese.
For blue Sapphires, the most gorgeous and expensive ones were Sapphires from Kashmir, but this deposit is no longer active.
Nowadays, the best ones come from Sri Lanka -which is the best deposit for any kind of sapphires - they’re called “Ceylon” or “Ceylonese” sapphires and have a cornflower blue color.
But the biggest deposit worldwide is Australia which produces rather greenish sapphires.
You can also find lots of sapphire deposit in the rest of South Asia, and even in Africa.
Gemstones Weight: 1.47 ct
Carat weight is the physical weight of the diamond; 1 Carat equals 1/5th of a gram. But that's not what's important, what is important is that the higher the carat weight of your jewelry or diamond the more it will shine, provided that you backed your carat weight with other characteristics that make the diamonds so special. We give unparalleled advice on how to decide what the most practical combination of diamond characteristics are most suitable for you and your jewelry. Listed below are a few combination with specific jewelry objectives, figure out your objective and the method of reaching it should be listed above.
High Quality
After years of being a jewelry consumer you will finally realize that quantity will not beat out quality, and for this you want to go with a minimum of VS1 F color. However, we rarely manufacture jewelry with this grade on a massive scale simply because few customers can appreciate it, pay for it, or even recognize it when they see it.
Gemstones Clarity: Very Lightly Included
The clarity of a stone is commonly described as being from "Free of Inclusions" over "Lightly", "Moderately",Heavily" to "Excessively Included".
Here is how we describe a stones clarity:
- Free of inclusions: Even under 10x magnification no inclusions become visible
- Very Lightly Included: Only a pro with a lens might find an inclusion, but maybe not.
- Lightly Included: Inclusions are visible under a 10x magnification but rarely with the unaided eye
- Moderately Included: One might see inclusions with the naked eye, but they should not dominate the stone
- Heavily Included: Inclusions are clearly visible and influence the stone's appearance
- Excessively Included: A stone might not be durable.
Gemstones Color: Blue
Color in diamonds has two sources: irradiation (usually by alpha particles), that causes the color in green diamonds; and physical deformation of the diamond crystal known as plastic deformation. Plastic deformation is the cause of color in some brown and perhaps pink and red diamonds. In order of rarity, white diamonds, are by far the most common, and are followed by yellow and brown, then it’s blue, green, black, translucent white, pink, violet, orange, purple, and the rarest color is red. "Black", or Carbonado, diamonds are not truly black, but rather contain numerous dark inclusions that give the gems their dark appearance. Colored diamonds contain impurities or structural defects that cause the coloration, while pure or nearly pure diamonds are transparent and colorless.
Gemstones Cut: Pear
Pear Cut
Pear shaped diamonds are a hybrid cut, combining the best of the oval and the marquise, shaped like a teardrop. Pear shaped diamonds also complements a hand with small or average-length fingers. It works exceptionally well in pendants or earrings.
Size:
10
Most common ring size for men is 10 and 7 for women. However, as you may be well aware, we are all different and sometimes need our rings to fit our individual finger sizes. In that case we need a professional jeweler to size our ring down or up. Unfortunately not all rings can be sized and some can only be sized just a little. Usually this factor is determined by the diamond setting and over all architecture of the ring. However if you find a ring you like and it doesn't seem to be available in your size feel free to contact us about custom ordering the ring in your size straight out of the factory. If you have patience this is the best way to order complicated settings such as invisible in your size.
To determine your ring size you may use the tool located
here.
Setting: Bezel
Bezel
The earliest technique of attaching stones to jewelry was bezel setting. A bezel is a strip of metal bent into the shape and size of the stone and then soldered to the piece of jewelry. Then the stone is inserted into the bezel and the metal rubbed over the stone, holding it in place. This method works well for either cabochon or faceted stones. Best for diamond chains and larger single diamonds this setting is like the business suit of diamond setting as it is not very elaborate and unique unless adorned by other settings.
Metal:
18k Two tone Gold
18k
18K also know as 750 because it is 75% pure gold. 18K is relatively the purest form of gold that we can use to manufacture quality diamond jewelry. An advantage of 18k is that it catches rhodium better then lower grades of gold. This gives 18K gold a much nicer white luster at first; but unfortunately when rhodium wears off 18K white gold is left looking yellowish and dull. However with yellow gold, 18k will retain the most high quality gold luster possible to practically use with diamond jewelry forever. 18k is heavy, precious, soft and should mostly be used in jewelry generally under 20 grams.

Weight: 7.30 Grams
When dealing with precious metals the total value is determined by the weight of the metal, usually per gram and the labor involved in working with it (such as polishing, casting etc.). The heavier the weight of the metal in your jewelry the more value it has and the more you will have to pay for it. Below is a list of weights that we recommend when purchasing a certain type of jewelry.
Mens Rings - 12-25 Grams
Mens Earrings- 1-5 Grams
Mens Braceletes 30-150 Grams
Mens Chains -20-150 Grams
Mens Pendants/Crosses - 20-60 Grams
Note: This weight mostly pretrial to gold jewelry.
1.47ct of Sapphire
1.03ct of Diamonds